Temperature Control Pack: Breezy 3 feathers + insulinsaver

Your insulin always at the right temperature and with the sensor that detects if something has gone wrong.

This pack is composed of:

BREEZY PACK

BreezyPacks are cooling cases designed to keep your insulin within the safe limits that prevent it from deteriorating. 

Breezy Pack uses materials that have been specifically designed and that change their state from solid to liquid depending on the temperature to which their contents are exposed (insulin or Epipen). Thanks to this operation, the material will become solid when the outside temperature is safe and will be liquefied to ensure the temperature as the temperature rises.

Its operation is simple, only the insulin must be placed inside and the wallet will be responsible for managing the temperature safely. When refreshed at night, the material will return to its original state without having to do anything special with the wallet, and only in scenarios where it is permanently above 25º we can help its rapid regeneration by introducing it for a few minutes in the fridge (never in the freezer).

That means all you have to do is place your medication inside. Your BreezyPack will keep it safe during the day and recharge at night.

• • No need to freeze, cool, soak in water, no more wet and moldy bags, forget about looking for batteries, charging them or worrying, never again.
  • Self-regenerating materials, called phase change materials, protect your medication throughout the day and regenerate on their own.
  • Created with recycled and non-toxic materials, from the product to its packaging.

Characteristics:

• • Dimensions: 7 x 7 x 20 cm 
  • Weight: 185g.
  • It can accommodate up to 3 insulin pens or 3 vials of 10 ml.
  • It is suitable for longer trips and large amounts of medicines.
  • It can last up to 8 hours at an average temperature of 35°C and will keep your medicine safe at a temperature of up to 41°C for shorter periods.
  • It is recharged only during the night (temperatures below 24ºC) or 30 min in the refrigerator.

ABOUT BREEZY PACKS

Breezy Packs is a small Canadian company,  not affiliated with any insulin manufacturer or Epipen or any other medicine. Breezy Pack was developed by Eyal Wormser, a  type 1 diabetic, avid traveler, chemical engineer and Israles researcher whose insulin was damaged too many times and you decided to make a product better for himself. Aware that many people share the  same difficulty this company created to make  this product accessible to others.

* Breezy Pack is an insulin storage element designed to keep it within the safe limits of conservation but in no case can it guarantee the correct state of the same due to external elements out of control (use, outside temperature, sun exposure, etc ...).

** Make responsible use of your insulin, if you detect possible damage discard your pen.

INSULIN SAVER

InsulinSaver is a temperature sensor to help people with diabetes who are undergoing insulin treatments.


InsulinSaver is designed to be a clear and easy-to-use aid. It glows green for a temperature between +2°C and +30°C, lights up red for a temperature above +30°C and glows blue for a temperature below +2°C.

• • Start your InsulinSaver:  To start your InsulinSaver, press and hold the START button for 8 seconds and the green LED will light up. Your InsulinSaver begins to record and analyze the temperature after 10 minutes.

• • Check that your InsulinSaver is turned on:  Press the START button once. If your InsulinSaver is on, all three LEDs should flash.
    
    
  • Indications of your InsulinSaver: 
    • Temperature within 2-30°C: The green LED, in the middle, indicates every 10 minutes that your InsulinSaver is, and has been, at an approved temperature
    • Temperature above 30°C:  If your InsulinSaver has been exposed to a temperature above 30°C, the red LED will flash every 5 seconds.
    • Temperature below 2°C:  If your InsulinSaver has been exposed to a temperature below 2°C, the blue LED will flash every 5 seconds.
      
      
  • Turn off/reset your InsulinSaver: To turn off insulinsaver, press and hold the START button for about 15 seconds. When all the LEDs are flashing, release the START button. All alarms will be reset. 
  • Check that your InsulinSaver is disabled: Press the START button once. If your InsulinSaver is off, it won't flash any LEDs.

Important:

• • InsulinSaver does not guarantee that your insulin can be used in all situations.
  • InsulinSaver is an aid to increase your control of insulin maintenance temperatures.
  • InsulinSaver does not withstand strong shocks or pressure.

Waste disposal:

• • Do not throw your InsulinSaver in the household trash.
  • insulinsaver is discarded as electronic waste.

Dimensions and Weight

Size: 5.5 cm x 2.5 cm x 0.4 cm
Weight: 8 g

Manual

   Download the manual in PDF. Here